The Subnose

80,00

Subnose0

The Subnose

The Snubnose is a specially sized RDA for those unuiqe builds unlike anything possible with a full sized RDA.

Features:

  • Four Posts
  • Square Peek Insulators
  • AFC
  • Copper Contacts
  • Wide Bore Drip Tip
  • Intricataly Engraved
  • Snubnose RDA Rebuildable Atomizer by VPRS brings performance, quality, and craftsmanship to the table in a small package!The Snubnose RDA Rebuildable Atomizer by VPRS is the newest member of the VPRS line up and brings full size RDA performance in a small package. The Snubnose RDA screams quality with its polished stainless steel construction and intricate engravings of a snubnose revolver from where it adopts its name, “SNUBNOSE” engraving, and the VPRS emblem on the drip tip. The Snubnose RDA is a three piece design featuring the deck, barrel, and top cap and measures 30mm tall from top to bottom with the barrel measuring only 15mm. The deck of the Snubnose RDA features a three post design with grub screws and the negative posts are milled into the deck and has a square dual split positive post. The deck, although small in size, has plenty of room for creative builds, plenty of wicking material, and can hold plenty of juice in its 4mm deep juice well. The positive post sits square in a square PEEK insulator with 510 copper connection for excellent conductive performance and heat resistance. The barrel of the Snubnose RDA features dual airflow with the airflow slots measuring 7mm by 2mm for optimal airflow. The top cap features airflow fins for single or dual airflow control, an integrated short 10mm wide bore drip tip, and a conical design inside the top cap for excellent flavor. The Snubnose RDA Rebuildable atomizer by the VPRS, full size atomizer performance in a small package.Product Features:
    • Three Piece Design
    • 4mm Deep Deck with Milled Negative Posts and Square Dual Split Positive Post
    • Copper Contact
    • 10mm Wide Bore Drip Tip
    • CNC Engravings
    • Dual Adjustable Airflow
    • 22mm Diameter
    • Square Peek insulators

    Advanced User Item. Use At Your Own Risk!

    L’ensemble du matériel proposé doit être utilisé de manière logique et suivant les conseils d’utilisation comme celui de ne pas descendre en dessous 0,20 Ohm!! ZE-vapeshop ne sera pas tenu responsable d’une utilisation inadéquate de son matériel!

    NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. ZE-vapeshop and any and all of ZE-vapeshop’s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). ZE-vapeshop and any and all of ZE-vapeshop’s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

    Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

    ZE-vapeshop will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.


 

Category:

Description

Subnose0

The Subnose

The Snubnose is a specially sized RDA for those unuiqe builds unlike anything possible with a full sized RDA.

Features:

  • Four Posts
  • Square Peek Insulators
  • AFC
  • Copper Contacts
  • Wide Bore Drip Tip
  • Intricataly Engraved
  • Snubnose RDA Rebuildable Atomizer by VPRS brings performance, quality, and craftsmanship to the table in a small package!The Snubnose RDA Rebuildable Atomizer by VPRS is the newest member of the VPRS line up and brings full size RDA performance in a small package. The Snubnose RDA screams quality with its polished stainless steel construction and intricate engravings of a snubnose revolver from where it adopts its name, “SNUBNOSE” engraving, and the VPRS emblem on the drip tip. The Snubnose RDA is a three piece design featuring the deck, barrel, and top cap and measures 30mm tall from top to bottom with the barrel measuring only 15mm. The deck of the Snubnose RDA features a three post design with grub screws and the negative posts are milled into the deck and has a square dual split positive post. The deck, although small in size, has plenty of room for creative builds, plenty of wicking material, and can hold plenty of juice in its 4mm deep juice well. The positive post sits square in a square PEEK insulator with 510 copper connection for excellent conductive performance and heat resistance. The barrel of the Snubnose RDA features dual airflow with the airflow slots measuring 7mm by 2mm for optimal airflow. The top cap features airflow fins for single or dual airflow control, an integrated short 10mm wide bore drip tip, and a conical design inside the top cap for excellent flavor. The Snubnose RDA Rebuildable atomizer by the VPRS, full size atomizer performance in a small package.Product Features:
    • Three Piece Design
    • 4mm Deep Deck with Milled Negative Posts and Square Dual Split Positive Post
    • Copper Contact
    • 10mm Wide Bore Drip Tip
    • CNC Engravings
    • Dual Adjustable Airflow
    • 22mm Diameter
    • Square Peek insulators

    Advanced User Item. Use At Your Own Risk!

    L’ensemble du matériel proposé doit être utilisé de manière logique et suivant les conseils d’utilisation comme celui de ne pas descendre en dessous 0,20 Ohm!! ZE-vapeshop ne sera pas tenu responsable d’une utilisation inadéquate de son matériel!

    NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. ZE-vapeshop and any and all of ZE-vapeshop’s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making).  Please have a basic understanding of the batteries you are using and how to care for them properly.


     

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.